Solar energy is the ultimate source of energy, which is naturally
replenished in a short period of time, for this reason it is
called "renewable energy" or "sustainable energy"
source. To take advantages of solar energy, the variety of technologies
is used to covert solar energy to heat and electricity. The
use of solar energy involves 'energy conservation' because it
is the way to use energy source that comes from the nature and
uses it more wisely and efficiently. That way includes Solar
Cell, which is described as follows:
What is Solar Cell?
Solar Cell or Photovoltaic (PV) cell is a device that
is made up of semiconductor materials such as silicon, gallium
arsenide and cadmium telluride, etc. that converts sunlight
directly into electricity. When solar cells absorb sunlight,
free electrons and holes are created at positive/negative
junctions. If the positive and negative junctions of solar
cell are connected to DC electrical equipment, current is
delivered to operate the electrical equipment. |
|
Solar cell types
There are three major cell types that classified by its manufacturing
technology and the semiconductor.
|
|
|
Single Crystalline Silicon
PV Module
|
Polycrystalline Silicon
PV Module
|
Amorphous Silicon
PV Module
|
1.
|
Crystalline Silicon PV Module: Two types of crystalline
silicon (c-Si) are used to produce PV module; single crystalline
silicon or known as monocrystalline silicon and multi-crystalline
silicon, also called polycrystalline silicon. The polycrystalline
silicon PV module has lower conversion efficiency than single
crystalline silicon PV module but both of them have high
conversion efficiencies that average about 10-12%. |
2.
|
Amorphous Silicon PV Module: Amorphous silicon
(a-Si) PV module or thin-film silicon PV module absorbs
light more effectively than crystalline silicon PV module,
so it can be made thinner. It suits for any applications
that high efficiency is not required and low cost is important.
The typical efficiency of amorphous silicon PV module is
around 6%. |
3.
|
Hybrid Silicon PV Module: A combination of single
crystalline silicon surrounded by thin layers of amorphous
silicon provides excellent sensitivity to lower light levels
or indirect light. The Hybrid silicon PV module has highest
level of conversion efficiency about 17%. |
Solar cell structure
The most semiconductor material currently use for solar cell
production is silicon, which has some advantages as; it can
be easily found in nature, does not pollute, does not harm the
environment and it can be easily melted, handled and formed
into monocrystalline silicon form, etc. The commonly solar cell
is configured as a large-area p-n junction made from silicon.
How solar cell works?
When sunlight strikes solar cell surface, the cell creates charge
carrier as electrons and holes. The internal field produced
by junction separates some of positive charges (holes) from
negative charges (electrons). Holes are swept into positive
or p-layer and electrons are swept into negative or n-layer.
When a circuit is made, free electrons have to pass through
the load to recombine with positive holes; current can be produced
from the cells under illumination.
The individual solar cells are connected together to make a
module (called 'solar module' or 'PV module') to increase current
and the modules are connected in an array (called 'solar array'
or 'PV array'). Depending on current or voltage requirement,
solar arrays are connected in a variety of ways:
|
If the solar arrays are connected in parallel, the output
current will increase. |
|
If the solar arrays are connected in series, the output
voltage will increase. |
Solar PV system
Solar cells produce direct current (DC), therefore they are
only used for DC equipments. If alternating current (AC) is
needed for AC equipments or backup energy is needed, solar photovoltaic systems require other components in addition to solar modules.
These components are specially designed to integrate into solar
PV system, that is to say they are renewable energy products
or energy conservation products and one or more of components
may be included depending on type of application.
The components of solar photovoltaic system are
1.
|
Solar Module is the essential component of any
solar PV system that converts sunlight directly into DC
electricity. |
2.
|
Solar Charge Controller regulates voltage and current
from solar arrays, charges the battery, prevents battery
from overcharging and also performs controlled over discharges. |
3.
|
Battery stores current electricity that produces
from solar arrays for using when sunlight is not visible,
nighttime or other purposes. |
4.
|
Inverter is a critical component of any solar PV
system that converts DC power output of solar arrays into
AC for AC appliances. |
5.
|
Lightning protection prevents electrical equipments
from damages caused by lightning or induction of high voltage
surge. It is required for the large size and critical solar
PV systems, which include the efficient grounding. |
Solar cell advantages
Solar cell or PV cell produces clean with non-polluting energy
source of electricity that is environmental-friendly. Since
it uses no fuel other than sunlight, gives off no waste, no
burning, and no moving part when it operates. It reduces collection
of gases such as carbon monoxide, sulfur dioxide, hydrocarbon
and nitrogen, etc., which generated from fuel, coal and fossil
fuel burning power plants. All decrease the impacts of energy
on the environment like greenhouse effect, global warming, acid
rain and air pollution, etc. It is easy to install and transportable.
With the modular characteristic, it can be constructed any sizes
as required. Moreover, it requires minimal maintenance and has
long life span (more than 30 years) and stable efficiency.
Solar cell applications
|
Home |
Indoor and outdoor lighting system, electrical equipment,
electric gate opener, security system, ventilator, water
pump, water filter and emergency light, etc.
|
|
|
Lighting system |
Bus stop lighting, telephone booth lighting, billboard
lighting, parking lot lighting, indoor and outdoor lighting
and street lighting, etc. |
|
|
Water pumping |
Consumption, public utility, livestock watering, agriculture,
gardening and farming, mining and irrigation, etc. |
|
|
Battery charging system |
Emergency power system, battery charging center for rural
village and power supply for household use and lighting
in remote area, etc. |
|
|
Agriculture |
Water pumping, agricultural products fumigator, thrashing
machines and water sprayer, etc. |
|
|
Cattle |
Water pumping, oxygen filling system for fish-farming
and insect trapped lighting, etc. |
|
|
Health center |
Refrigerator and cool box for keeping medicines and vaccines
and medical equipment, etc. |
|
|
Communication |
Air navigational aid, air warning light, lighthouse, beacon
navigation aid, illuminated road sign, railway crossing
sign, street lighting and emergency telephone, etc. |
|
|
Telecommunication |
Microwave repeater station, telecommunication equipment,
portable communication equipment (e.g. communication radio
for service and military exercise) and weather monitoring
station, etc. |
|
|
Remote area |
Hill, island, forest and remote area that the utility
grids are not available, etc. |
|
|
Space |
Satellite, international space station and spacecraft,
etc. |
|
|
|
|
|
|